The unbalanced current flows in the circuit during the earth fault is known as the zero sequence current or the DC component of the fault current.The zero phase sequence means the magnitude of three phases has zero phase displacement.The three vector lines represent the zero sequence current and it is detected by adding the vector of three phases current.
Ø Frequency Range: 50-400Hz
Ø Over Load withstand: 1.2 x rated current continuously
Ø AC isolation resistance: 5.0KV for 60s
Ø Rigid housing case with UL® 94V-0 polycarbonate
Ø Safety standard: IEC/EN60044-1
Ø Nominal phase angle error and
Ø Nominal linearity error: Conform IEC61869-2/ConformIEC60044-1
Ø Max. Operation voltage: AC660V
Ø Thermal Insulation Class: Class B
Ø Humidity: Up to 95%RH (Non-condensing)
● Close to zero load shift
● Excellent balance properties
● Precision output voltage
● Minimal thermal variance
● RoHS compliant
● Smaller volume, lighter weight
● Perfect protection, delicate structure for convenient installing
● Excellent design and industrial appearance
● High accuracy satisfied diverse application
● Flexible design
● Versatile modular box for diverse application
Main circuit Current
Absolute Maximum Ratings
Operating free air temperature range
-20ºC to 65ºC
Storage temperature range
-40ºC to 85ºC
High accuracy qualified
This series of products are on the basis of the existing mature technology, choose more high quality raw materials and combined with the optimization of the shape design, test accuracy gets strong guarantee and better than the national standard requirements: 0.5%, for special requirements, accuracy can reach to 0.2%.
This project combines the optimal magnetic circuit design, and take full account of the necessary space requirements, so as to ensure the balance test. If necessary, the balance property can be in the specified detection conditions to achieve 5mA-50mA. Fully meet the detection circuit requirements.
At the same time, this series of products can be used for main circuit current testing, and fire power monitoring current, detection current scope from 50A-2000A, Accuracy is better than class 0.5 when secondary output at 5A .Accuracy is better than class 0.2S level when secondary output at 1A,When measure high current , mA level weak signal can be outputed,the accuracy is better than class 0.1
1.Q:Where is your factory located?
A:Our factory address is Zhuqing Village Industrial Park Gangxia Town, Xishan District, Wuxi, Jiangsu, China.
2.Q:What is your minimum order quantity?
A:Our minimum quantity is 50 pc.
3.Q:What is the delivery time of your products?
A:In general, the delivery time of our products is about10-15 days.
4. Q: May i know which payment will be accepted by your company?
A:Western Union and T/T