Ground Fault Protection Current Transformer

Ground Fault Protection Current Transformer

Introduction In the electrical systems always exists the possibility of having shutdowns due to over currents or short circuits produced by operation mistakes, ambient conditions, lack of maintenance or atmospheric discharges. Ground fault it occurs when one of the system phases get on direct...
Chat Now

Product Details

Introduction

In the electrical systems always exists the possibility of having shutdowns due to over currents or short circuits produced by operation mistakes, ambient conditions, lack of maintenance or atmospheric discharges. Ground fault it occurs when one of the system phases get on direct contact to ground or to any metallic part that is grounded. The ground fault has its origin on different ways but the more common are reduced insulation, physical damages to insulation system or excessive transient or steady-state voltage stresses on insulation. These problems can be produced due to moisture , atmospheric contamination, insulation deterioration, mechanical stresses, etc. Although the situations mentioned before can be avoided following a good maintenance Schedule, always exists the latent risk of a fault, commonly during the installation or major maintenance to equipment.

Features

• Frequency Range: 50-400Hz

• Over Load withstand: 1.2 x rated current continuously

• AC isolation resistance: 5.0KV for 60s

• Rigid housing case with UL® 94V-0 polycarbonate

• Safety standard: IEC/EN60044-1

• Nominal phase angle error and

Nominal linearity error: Conform IEC61869-2

                    ConformIEC60044-1

• Max. Operation voltage: AC660V

• Thermal Insulation Class: Class B

• Humidity: Up to 95%RH (Non-condensing)

Description

Close to zero load shift

Excellent balance properties

Precision output voltage

Minimal thermal variance

RoHS compliant

Smaller volume, lighter weight

Perfect protection, delicate structure for convenient installing

Excellent design and industrial appearance

High accuracy satisfied diverse application

Flexible design

Versatile modular box for diverse application

Mechanical Specifications

3

P/N

Main circuit Current 
(A)

Diameter(Φ)
(mm)

Dimensions(mm)

Layout dimensions(mm)

L

W

HD1-D2M

LO-ZCT513102

0-100A

46

85

32

92.5

88-100

6

LO-ZCT513202

0-250A

65

108

32

118.5

109-122.5

6

LO-ZCT513302

0-315A

80

128

36

138.5

134-144

6

LO-ZCT513402

0-630A

100

150

36

160.5

152-171.5

6

LO-ZCT513502

0-800A

120

172

36

182.5

177-196.5

6

ABSOLUTE MAXIMUM RATINGS

Operating free air temperature range

-20ºC to 65ºC

Storage temperature range

-40ºC to 85ºC

4

5

6

High accuracy qualified
This series of products are on the basis of the existing mature technology, choose more high quality raw materials and combined with the optimization of the shape design, test accuracy gets strong guarantee and better than the national standard requirements: 0.5%, for special requirements,  accuracy can reach to 0.2%.

 This project combines the optimal magnetic circuit design, and take full account of the necessary space requirements, so as to ensure the balance test. If necessary, the balance property can be in the specified detection conditions to achieve 5mA-50mA. Fully meet the detection circuit requirements.

At the same time, this series of products can be used for main circuit current testing, and fire power monitoring current, detection current scope from 50A-2000A, Accuracy is better than class 0.5 when secondary output at 5A .Accuracy is better than class 0.2S level when secondary output at 1A,

When measure high current , mA level weak signal can be outputed,the accuracy is better than class 0.1 

 7

8

Custom-made

The module box can be customized according to the customer's requirement. Or optimize the box in the original basis. We will do our best to support these optimizations.

All module boxes can be re-designed and developed according to customer needs. Even the residual current transformer can also be re-designed according to special needs of customers.

How to Order?

1. Please let us know our P/N for off-the-shelf parts. Please send us electric specifications if you need custom-made parts.

2. Proforma invoice (PI) will be sent to you.

3. Please check and confirm the PI.

4. Once we confirmed the order, please pay it soon.

5. After full payment, all goods will be sent to you in 10-15 days as usual.

6. OEM/ODM is welcomed. Free OEM for more than 5000 sets orders.

QQ图片20200716135417_meitu_1

Hot Tags: ground fault protection current transformer, China, manufacturers, customized, quotation, low price, made in China, Split-core AC Current Transformer, Zero Sequence Current Transformers, Zero Sequence Fault Current Transformer, Split Core Current Transformers, Automotive Antenna Used For Vehicle, Earth Fault Current Transformer

Inquiry

You Might Also Like