Residual current transformer wiring precautions

- Nov 25, 2019-

1. Before the wiring, be sure to distinguish the phase line, N line and PE line in the power grid. Otherwise, problems will occur, resulting in inaccurate measurement data and false alarms.

2. The phase line and the N line must pass through the residual current transformer together. The PE line cannot pass through the transformer, and it will also affect the deviation of the circuit parameters. It should be treated with caution.

3. If the N line does not pass through the transformer together with the phase line, once the three-phase load is unbalanced, a current will flow through the N line, and the detector detects the current signal, causing a misoperation.

4. If the PE line passes through the transformer together with the N line and the phase line, it will also cause an error alarm of the monitoring detector, which seriously affects the normal operation of its work.

5. The N lines between different circuits are not connected or grounded repeatedly. Otherwise, it will cause malfunction, and the leakage current value will be too large and an alarm will occur. Most of them are caused by this cause.

The correct wiring method can make the fire monitoring detector operate normally and effectively prevent the occurrence of electrical fires.