Primary winding of high frequency output transformer
The primary winding of the high-frequency output transformer should be placed in the innermost layer, so that the length of the primary winding of the transformer can be minimized, so that the entire winding is minimized, which effectively reduces the distributed capacitance of the primary winding itself. .
Secondary winding of high frequency output transformer
When the operation is performed, the primary winding is wound, and the insulating spacer is wound to rewind the secondary winding during use. This reduces the capacitance of the distributed capacitance between the primary winding and the secondary winding, and also increases the dielectric strength between the primary and secondary, meeting the insulation withstand voltage requirements.
Bias winding of high frequency output transformer
The bias winding of the high frequency output transformer is wound between the primary and secondary, or wound around the outermost layer, and the adjustment of the switching power supply is based on the secondary voltage or the primary voltage.www.ctsensorducer.com