Operating regulations for miniature current transformers

- Aug 31, 2020-

In the case of our miniature current transformer, it actually means that we can effectively protect our personal safety during our actual construction. Furthermore, in terms of our miniature current transformer, it is actually itself A kind of electrical equipment. In this way, when we use it, we must follow certain operating regulations.

As far as our miniature current transformer is concerned, as far as its load current is concerned, in fact, it should not exceed its rated value of 110. In addition, we actually need to pay attention to it. If it is overloaded for a long time, it will actually increase our measurement error. Furthermore, it is because its windings are overheated or damaged.

As far as the operation of the miniature current transformer is concerned, we actually need to pay attention to that, when it is in a relatively normal operating condition, it is actually forbidden to cause an open circuit operation of its secondary circuit. Otherwise, it will actually generate a high voltage of several thousand volts, which will endanger our personal and equipment safety. Furthermore, in terms of its secondary circuit, it must be grounded with a little (protection).

Furthermore, in terms of the operation of the miniature current transformer, it is actually not allowed to connect with the secondary circuit of the voltage transformer. Otherwise, our transformer will actually have a series of failures and hazards directly.

Finally, when it comes to the operation of the miniature current transformer, in fact, it should be noted that its oil-immersed miniature current transformer should be directly equipped with an oil level gauge and its respirator. In simple terms, for its 110kV and above In fact, it should be directly used as a fully-sealed type or a metal expander with micro-positive pressure. Otherwise, failure and dangerous situations cannot be avoided.https://www.ctsensorducer.com/