The split core current transformers can be installed in any closed cable or busbar line. It has an open current transformer, so it is not necessary to cut off the cable or disassemble the busbar circuit during installation, which is convenient for on-site electrician installation. It is specially designed for ring switchgear. , box-type substation, hotel, shopping mall plaza, etc. to achieve automatic upgrade design, for rated voltage 0.66KV 380V below the indoor AC 50HZ power cable line level in its equipment for current, energy measurement and protection use, saving time and Save on installation costs.
The standard split core current transformers is mainly used in industrial mid-city network and agricultural network transformation projects, and is easy to install. There is no need to dismantle the busbars, and it can also be operated with electricity. It does not affect the normal power consumption of customers, and saves a lot of manpower, material resources and financial resources for the user transformation project, and improves the efficiency of transformation.
Split core current transformers can be used with relay protection, measurement and metering devices. The high-strength PVC casing is used for the whole cast bus structure. The transformer is directly stuck on the cable. The three rubber rings are connected to the cable and the cable. The transformer core is made of high-quality silicon steel sheet, and the secondary wire is evenly wound on the iron core. The transformer is an open-close structure that can be installed without cutting the cable.www.ctsensorducer.com